Categories

Contact Us

ADD:Room 608, Building A, Hongshengyuan Industrial Zone, No.339 Bulong Road, Bantian Street Office, Longgang District, Shenzhen, Guangdong, P.R.China

TEL:+86-755-28345166-807

Mobile:+8618986583795

FAX:+86-755-28345166-804

E-mail:lemon@szlbt.net

News

Home > News > Content

LTE Router Installation Method

Shenzhen Libtor Technology Co.,Ltd | Updated: Sep 20, 2017

The LTE wireless router must be properly installed to achieve the design function, and usually the installation of the equipment must be carried out under the guidance of a certified qualified engineer of the four letter company.

1. Packing List

When you open the box, please keep the packing material so that it can be used when transshipment is needed. The list is as follows:

LTE wireless Router host F3X26 1 sets

Wireless honeycomb antenna (SMA head) 2

WiFi antenna (SMA glans) 1 root

Matching power supply One

Ethernet Straight Line 1

1 sheet

RS232 Console Line 1 (optional)

Product Certificate

Product Warranty Card

2. Installation and Cable Connection

Overall Dimension:

Dimensions Unit: mm) fixed piece and routing equipment Screw specification: m3*5mm countersunk head screws.

3. Antenna Installation:

The Wireless wide area network antenna interface is a SMA head socket (labeled "Ant-m" and "ant-a"), and the SMA head of the matching wireless honeycomb antenna is screwed to the antenna interface, which ensures that it is tightened so as not to affect the signal quality.

The Wireless LAN Antenna interface is a SMA head socket (labeled "WiFi"), and the SMA head of the matching WIFI antenna is screwed to the antenna interface, ensuring that it is tightened so as not to affect the signal quality.

Note: Wireless cellular antennas and WiFi antennas cannot be reversed, otherwise the device will not work.

4./Card Installation:

Install or remove/card, first with a sharp object gently resist the return Kari (/left round small dots),/card sleeve can pop. Install/card, the first/card into the card set, and ensure that the/card metal contact face outward, and then the/card sleeve into the drawer, and ensure the insertion in place.

5. Connect the network cable:

Plug one end of the network straight line into the router LAN port and the other end into the Ethernet interface of the user device.

6. Connect Console line: (Connect with serial port required)

Plug the RJ45 end of the console line onto the Router console interface (RS232), and the DB9 port is plugged into the RS232 serial interface of the user device, and the console signal is connected.


Our Service

Shenzhen Libtor Technology Co,Ltd Shenzhen Libtor Technology Co,Ltd founded in 2009, is a newly established high-tech enterprise intergrated the development production with marketing

Feedback

Tel: +86-755-28345166-807

Contact Us

Address: Room 608, Building A, Hongshengyuan Industrial Zone, No.339 Bulong Road, Bantian Street Office, Longgang District, Shenzhen, Guangdong, P.R.China

Home | About Us | Products | News | Solution | Contact Us | Feedback | Download | Exhibition | Mobile | XML

Copyright © Shenzhen Libtor Technology Co.,Ltd

share: