Categories

Contact Us

ADD:Room 608, Building A, Hongshengyuan Industrial Zone, No.339 Bulong Road, Bantian Street Office, Longgang District, Shenzhen, Guangdong, P.R.China

TEL:+86-755-28345166-807

Mobile:+8618986583795

FAX:+86-755-28345166-804

E-mail:lemon@szlbt.net

News

Home > News > Content

Industrial Router The Basic Working Principle Of Ethernet

Edit:Shenzhen Libtor Technology Co.,Ltd   Date:May 17, 2017

The basic working principle of Ethernet for industrial routers

All devices on the Ethernet of the Industrial Router are connected to the Ethernet bus and share the same communication channel. Industrial 4G router Ethernet uses a broadcast mode of communication, that is, all devices receive each packet. The devices on the network usually pass all the packets received to the host interface, where the computer to select the information to be received, and the other filter out. Industrial 4G routers Ethernet is the most effective means that the entire network router hardware does not provide the sender with information about the information that has been received. For example, even if the target computer happens to shut down, the package sent to it is naturally lost, but the sender does not know this.

All Netcom 4G router Ethernet control is distributed. Ethernet access is called Collision CarrierSenseMultipe

Access. Because multiple computers can use Ethernet at the same time, each machine to see if there is a carrier signal to determine whether the bus is idle. If the industrial network router host interface data to be transmitted, it listens to see if there is a signal is being transmitted. All Netcom industrial router if it is not detected, it began to transfer. Each transmission is in a certain time interval, that is, the transmission of the package has a fixed size. Moreover, the hardware must also be observed between two transfers, the smallest free time, that is, the whole network through the industrial router does not have a pair of machines can not give other computer communication opportunities and use the bus.


Our Service

Shenzhen Libtor Technology Co,Ltd Shenzhen Libtor Technology Co,Ltd founded in 2009, is a newly established high-tech enterprise intergrated the development production with marketing

Feedback

Tel: +86-755-28345166-807

Contact Us

Address: Room 608, Building A, Hongshengyuan Industrial Zone, No.339 Bulong Road, Bantian Street Office, Longgang District, Shenzhen, Guangdong, P.R.China

Home | About Us | Products | News | Solution | Contact Us | Feedback | Download | Exhibition | Mobile | XML

Copyright © Shenzhen Libtor Technology Co.,Ltd

share: